Checking or cancelling your timers – Bang & Olufsen BeoSound Ouverture - User Guide User Manual

Page 31

Checking or cancelling your Timers

You can look up each Timer you have
programmed to either check its
contents, or to cancel it completely. To
do so, you must press the PROGRAM
button.

When you have pressed PROGRAM,
you must first decide which type of
Timer it is that you want to look up:
RECORD, PLAY, or ST.BY. (stand-by).

Then, display CHECK? – and press
PLAY. You will then find that each
Timer you have programmed within
that group is listed.

To leaf through the Timers, just press

▲

repeatedly. You can also check the
exact contents of a Timer by pressing
PLAY repeatedly.

At the end of each Timer, you will see
the cue MORE? in the display, mean-
ing: “Do you want to check the next
timer programming?” Press PLAY if
you do; or press

▼ or tt to reveal

CLEAR? instead.

While CLEAR? is displayed, pressing
PLAY will clear (cancel) the Timer you
have just checked.

Note: If you want to clear a Timer, without
checking its contents first, just look up the Timer
and press

to step directly to MORE?, then press

▼

to reveal CLEAR...

Press to access the Timer
programming function

Press repeatedly to display the type
of Timer you wish to check
(Record / Play / Stand-by)

Accesses the displayed group of
Timers

The display reads NEW?

Press until CHECK? is displayed

Press to start checking your
programmed Timers within that
group...

Press repeatedly to display your
programmed Timers one by one

Press repeatedly if you want to
check a particular Timer in detail

When MORE? is displayed...
Press to see the next Timer

Press to reveal CLEAR? instead

Clears (cancels) the current Timer
The display reads CLEARED

PROGRAM

PLAY

then

PLAY

then

PLAY

then

PLAY