Bang & Olufsen Playmaker - User Guide - Manual (Page 10)

Network setup
BeoSetup App
For iOS and Android devices, use
the BeoSetup App* 1 to set up your
wireless network profile, to change
the product name or to update
software. You can also enter the
Playmaker setup page on your
computer.
First time setup …
> Connect Playmaker to the mains
supply to switch on the product.
> The network indicator flashes
white for 1–2 minutes and then
flashes green.* 2
> Find and connect to ‘Playmaker_
xxxxxxxx’ on your wireless
device.
> Open the BeoSetup App.
> The app will locate your product
in the network.
> Select your product and follow
on-screen instructions.
To make changes in the network
setup …
> Your iOS or Android device must
be connected to the same
network as Playmaker.
> Open the BeoSetup App.
> The app will find your product in
the network.
> Select your product and follow
on-screen instructions.
Wireless setup without
BeoSetup App
If you for some reason cannot set
up Playmaker via the
BeoSetup App, an Ethernet cable
must be used temporarily to set up
your Playmaker for a wireless
connection.
Wireless setup via cable …
> Disable the wireless network on
your computer.
> Connect Playmaker directly to
the computer using an Ethernet
cable.
> Connect Playmaker to the mains
supply to switch on the product.
> The network indicator flashes
white for about 60 seconds and
then becomes solid white.* 2
Your Playmaker must be set up
in a network either with a
wired or wireless connection.
To perform the setup, Playmaker
must be connected to the mains
supply and switched on.
Choose one of the following
setup procedures:
– BeoSetup App for iOS and
Android devices* 1
– Wireless setup without
BeoSetup App (via cable)
– Wired connection
When Playmaker is set up in a
network, you can change
different settings using the
BeoSetup App or your com­
puter. For example, you can
change the name of your
Playmaker on the network or
update its software. For more
information about how to
change settings, see the
Playmaker section on www.
bang-olufsen.com/faq.
10
1 *The BeoSetup App supports iOS
and Android devices only. Scan the
QR code on page 3 to download
the app.
A previously well-functioning setup
may develop problems over time as
surroundings change. Check your
Ethernet connection or router. If
the problem persists, contact your
Bang & Olufsen retailer.
Continues …
2 *For an overview of buttons and
LEDs, see ‘How to operate your
Playmaker’.