Bang & Olufsen BeoLab 10 - User Guide - Manual (Page 5)

The POSITION switch
When a loudspeaker is placed
in a corner or close to a wall,
the bass level is boosted
compared to the bass level from
a loudspeaker placed in a more
free-standing position.
To remove this excessive bass
boost, use the POSITION switch
to ensure that the bass level
suits the placement of the loud-
speaker. The appropriate switch
setting depends on the distance
from the loudspeaker to the
walls and corners of the room.
The switch has two settings:
W – Wall position
This is the factory setting. Use this
setting when the loudspeaker is
placed so that the front is less than
50 cm (20") from the rear wall, for
example when the loudspeaker is
mounted on the wall bracket as
explained in this Guide.
F – Free-standing position
This setting is for future use. To be
used if the loudspeaker is placed
so that the front is more than
50 cm (20") from the rear wall.
The POSITION switch is located on
the loudspeaker socket panel.
F W
5
Acoustic Lens Technology –
manufactured under license from
Sausalito Audio Works.