Bang & Olufsen BeoLab 10 - User Guide - Manual (Page 2)

Cautions!
– Make sure that the loudspeaker
is placed and connected in
accordance with the instructions
in this Guide. To prevent injury,
use Bang & Olufsen approved
stands and wall brackets only!
– The loudspeaker can only be
switched off completely by
disconnecting it from the wall
socket.
– Do not attempt to open the loud­
speaker. Leave such operations
to qualified service personnel!
– The loudspeaker is designed for
indoor use in dry, domestic
environments only, and for use
within a temperature range of
10–40º C (50–105º F).
– Do not place any items on the
loudspeaker.
– Do not lift the loudspeaker by
gripping the acoustic lens.
– Prolonged listening at high
volume levels may cause hearing
damage!
WARNING: To reduce the risk of fire or
electric shock, do not expose this appliance
to rain or moisture. Do not expose this
equipment to dripping or splashing and
ensure that no objects filled with liquids,
such as vases, are placed on the equipment.
To completely disconnect this equipment
from the AC Mains, disconnect the mains
plug from the wall socket. The disconnect
device shall remain readily operable.
The lightning flash with arrowhead symbol
within an equilateral triangle, is intended
to alert the user to the presence of un­
insulated “dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and main­
tenance (servicing) instructions in the
literature accompanying the product.
CAUTION: To reduce the risk of
electric shock, do not remove
cover (or back).
No User-serviceable parts inside.
Refer servicing to qualified service
personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN