The spa screen and shortcut screen, All equipment access, One-press activation – Balboa Water Group TP900 User Manual

Page 4: Ready in rest mode heating, Ready in rest mode heating shortcuts

40985_F

12-08-11

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

The Spa Screen and Shortcut Screen

All Equipment Access

The Spa Screen shows all available equipment to control, as well as other features, like Invert, in one easy-to-navigate screen.
The display shows icons that are related to the equipment installed on a particular spa model, so this screen may change
depending on the installation.

The navigation buttons are used to select an individual device. The device that is chosen is highlighted with a white outline
and the text under the icon changes to white. Once a device is selected, it can be controlled using the center Select Button.

Some devices, like pumps, may have more than one ON state, so the icon will change to refl ect the state that the
equipment is in. Below are some examples of 2-speed Pump indicators.

Jets High

Jets Low

Jets Off

If the Spa has a Circ Pump, a Circ Pump Icon will appear to indicate its activity, but outside of Priming Mode, the Circ Pump
cannot be controlled directly.

NOTE: The icon for the pump that is associated with the heater (Circ or P1 Low) will have a red glow in the center when the
heater is running.

Ready in Rest Mode
Heating

Back

Jets 1

Jets 2

Jets 3

Light

Invert

One-Press Activation

The Shortcut Screen requires no navigation. Each button is fi xed on a specifi c fuction and can be used as a very simple user
interface for the spa.

Each button function is illustrated in the display and mapped according to the manufacturer’s instructions.