Balboa Water Group TP900 - Manual (Page 20)

40985_F 12-08-11 20
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
System-Related Messages
Program memory failure* – M022
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the fi rmware (operation
program) and requires a service call.
The clock has failed* – M020
Contact your dealer or service organization.
The GFCI test failed (System Could Not Test the GFCI) – M036
(North America Only) May indicate an unsafe installation. Contact your dealer or service organization.
Hot fault – M035
A Pump Appears to have been Stuck ON when spa was last powered
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
A pump may be stuck on – M034
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
Confi guration error (Spa will not Start Up)
Contact your dealer or service organization.
The settings have been reset (Persistent Memory Error)* – M021
Contact your dealer or service organization if this message appears on more than one power-up.
* This message can be reset from the topside panel.
M0XX numbers are Message Codes. See Page 13.