Balboa Water Group TP900 - Manual (Page 21)

40985_F 12-08-11 21
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Reminder Messages
Check the pH
May appear on a regular schedule, i.e. every 7 days.
Check pH with a test kit and adjust pH with the appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days.
Check sanitizer level and other water chemistry with a test kit and adjust with the appropriate chemicals.
Clean the fi lter
May appear on a regular schedule, i.e. every 30 days.
Clean the fi lter media as instructed by the manufacturer. See HOLD on page 13.
Test the GFCI (or RCD)
May appear on a regular schedule, i.e. every 30 days.
The GFCI or RCD is an important safety device and must be tested on a regular basis to verify its reliability.
Every user should be trained to safely test the GFCI or RCD associated with the hot tub installation.
A GFCI or RCD will have a TEST and RESET button on it that allows a user to verify proper function.
General maintenance helps.
Reminder Messages can be suppressed by using the Preferences Menu. See Page 14.
Reminder Messages can be chosen individually by the Manufacturer. They may be disabled entirely, or there may be a limited
number of reminders on a specifi c model. The frequency of each reminder (i.e. 7 days) can be specifi ed by the Manufacturer.
Reminder messages can be reset from the topside panel.
Additional messages may appear on specifi c systems.
Change the water
May appear on a regular schedule, i.e. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary conditions.
Clean the cover
May appear on a regular schedule, i.e. every 180 days.
Vinyl covers should be cleaned and conditioned for maximum life.
Treat the wood
May appear on a regular schedule, i.e. every 180 days.
Wood skirting and furniture should be cleaned and conditioned per the manufacturers instructions for maximum life.
Change the fi lter
May appear on a regular schedule, i.e. every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.