Balboa Water Group Dolphin II CE User Manual
Page 31
31
1.5 to 2.0 inches appart
90 angle
Original Remote
4. Press the learning key (e.g., Guide) twice. The
LED will blink twice after the second press.
5. To clear additional functions stored on
other learning keys, repeat steps 1 through 4
(in this section).
Feature Reset
This function will clear all volume lock and learned
key functions. It does not clear device codes and
mode reassignments.
1. On the Dolphin, press and hold SETUP until the
LED (red light) blinks twice, then release SETUP.
2. Enter 9 - 8 - 0. The LED will blink 4 times when
reset is complete..
NOTE: LEARNING SHOULD BE DONE INDOORS AND
AWAY FROM FLUORESCENT LIGHTS.
Original Remote LED
Dolphin Remote
FCC Authorization Label
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference; and
2. This device must accept any interference
received, including interference that may cause
undesired operation.
FCC ID #: MG31033-4