Balboa Water Group Dolphin II CE - Manual (Page 17)

17
Paysat 0724
Philips 0749, 1749, 1142, 1442,
0724, 0722, 0856, 1076,
0099
Proscan 0566, 0392
RadioShack 0869
RCA
0566, 0143, 0855, 0392,
1392
SKY 0856, 1856, 0099
Samsung 1276, 1109
Sanyo 1219
Sony 0639, 1639, 1640
Star Choice 0869
Tivo 1142, 1442, 1443, 1444
Toshiba 0749, 1749, 0790, 1285
UltimateTV 1640, 1392
Uniden 0724, 0722
Voom 0869
Zenith 0856, 1856
PROGRAMMING DVD
CONTROL
Locate the brand name of your DVD player in the
Setup Codes For DVD Players section below, and
write it in the following space.
DVD Player Brand:
The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your DVD Player:
1. Turn on the DVD Player.
2. On the Dolphin, press DVD once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your DVD
Player. If you perform this procedure correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Dolphin at your DVD Player and press
POWER once. The DVD Player should turn
off. If it does not respond, repeat steps 2-4,
trying each code for your brand until you find
one that works. If it still does not work, try
searching for the code (see Searching For Your
Code on page 25).
5. Write your DVD code in the boxes below for
future reference.
QQQQ
NOTE: Remember, to use the Dolphin to operate
your DVD Player, press DVD first.