Balboa Water Group Dolphin II CE - Manual (Page 29)

29
To Change Volume Lock to the CD mode:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press CD once. The
LED will blink twice.
3. Now, whenever you press Volume +, Volume
–, or MUTE on the Dolphin, volume will be
controlled by your CD Player.
To Change Volume Lock to the RCVR mode:
NOTE: Performing these steps will allow you to
access the volume control of your audio component
in all modes.
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press RCVR once. The
LED will blink twice.
3. Now, whenever you press Volume +, Volume
–, or MUTE on the Dolphin, volume will be
controlled by your audio component.
Clearing Volume Lock
The volume lock can be cleared so that the volume
control buttons will control whatever device
is selected.
To clear the volume lock:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press Volume Up. The
LED will blink 4 times when unlocked.
Clearing Volume Lock For One Device
The volume lock can be cleared for one specific
device so that the volume control buttons will
control that device when it is selected.
To clear the volume lock for a specific device:
1. Press the device key for the unit to
be unlocked.
2. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
3. Enter 9 - 9 - 3 and then press Volume Down.
The LED will blink 4 times when unlocked.