Autocue QMaster - Manual (Page 7)

6. MOS Setup if using version 2 QBox:
In QMaster, go to Tools->Options->News Interfaces->MOS (r2)
In the Main Settings tab, in the MOS ID field, enter the MOS ID of the prompter.
Unless specifically instructed, leave the MOS Lower Port, Upper Port as the defaults.
In the Local Storage Path, enter a path which will be used to store data received via MOS. Make sure the
path is a folder that exists. If it doesn’t exist you must create it manually.
Resync all MOS rundowns on startup (roReqAll/roReq): If enabled, when QMaster is restarted,
QMaster will request to receive via MOS all “MOS active” rundowns from the newsroom system.
Resync MOS rundown list only on startup (request rundown data on open): If enabled, when QMaster
is restarted, QMaster will request the list of all “MOS active” rundowns. The rundown will be loaded
only after you choose one from the list.