Apotop DW23 Wi-Backup User Manual - Manual (Page 8)

EN-8
GETTING STARTED
Charging the Device
When the Power LED lights orange, you need to charge the device using the supplied
USB cable.
1. Connect one end of the USB cable to the USB port of the device.
2. Connect the other end of the USB cable to the computer or power adapter of
Smartphone/tablet.
The Charging LED lights red while the battery is charging. When the battery is
fully charged, the Charging LED will automatically turn off.
Turning the Device On/Off
To power on:
Slide the Mode switch to
.
The Power LED lights green, indicating the device is turned
on.
Note:

The Wi-Fi function will be activated approximately
25 seconds (blinking blue light) after the device is
turned on.
To power off:
Slide the Mode switch to OFF.