Changing osd language, Resetting to default, Changing administrator password – Apotop DW23 Wi-Backup User Manual User Manual
Page 29
EN-29
Changing OSD Language
To change the on-screen display (OSD) language, perform the following:
1.
On your mobile device, launch
Wi-Backup
APP.
2.
Tap Settings tab.
3.
Tap Device Setting > Multiple Language.
4.
Select the desired language and tap Apply to save the settings.
Resetting to Default
To restore all parameters to the default settings, perform the following:
1.
On your mobile device, launch
Wi-Backup
APP.
2.
Tap Settings tab.
3.
Tap Device Setting > Reset to Default.
4.
A confirmation message appears on the screen. Tap OK to reset the device.
Changing Administrator Password
To set or change the user name and password, perform the following:
1.
On your mobile device, launch
Wi-Backup
APP.
2.
Tap Settings tab.
3.
Tap Device Setting > Admin. Password.
4.
The Password Setup page appears. Configure the following options:
New User Name: Enter the new user name.
New Password: Enter the new password.
Confirmed Password: Reenter the new password.
5.
Tap Apply to save the settings.