BEA Iris Presence Detector - Manual (Page 2)

Iris Accessories
Spotfinder
for precise positioning
of the infrared curtains
in front of the door
WMB
mounting bracket for
ceiling mounting
WCA
for recessed and
concealed application
ISLL
3 lenses set (left, center and right)
for custom sidelite detection zones
Iris Components
Cable
Mounting Screws
Manual Set-up Push Buttons
Presence Sensor
Cover
LED Indicator
I.R. Remote Receiver
Front Lenses
1
1
4
2
2
3
3
4
5
5
6
7
6 7
8
8
www.beasensors.com
1
3
2
The Iris provides optimal safety around the threshold of an
automatic sliding door with 2 rows of 24 focused infrared spots.
The application above shows the Iris installed as additional overhead
safety sensor (as required by the upcoming 2005 ANSI 156.10 standard)
on an automatic sliding door equipped with an existing double set of
beams and a set of motion detectors.
APPROACH SIDE
APPROACH SIDE
Iris Applications
Threshold Safety for Sliding Door Sidelite Safety for Sliding Door
Remote Control
for easy and accurate
setup of the Iris
The Iris has the ability to inhibit the safety curtain furthest
from the door for sidelite protection. Different lenses are
available for a customized detection zone. The application
above shows the Wizard installed as primary detection and
safety sensor and the Iris used as sidelite protection sensor.
The ISSL accessory is recommended for that specific installation.
Contact Information
BEA Inc.
RIDC Park West
100 Enterprise Drive
Pittsburgh PA, 15275
Phone +1.412.249.4100
Fax +1.412.249.4101
Toll Free 1.800.523.2462
BEA West
2401 Pine Street
Los Angeles, CA 91767
Phone +1.909.596.3011
Fax +1.909.596.5411
Toll Free 1.877.232.9378
Additional Safety for Swinging Door
The Iris can be mounted in the ceiling thus eliminating the
need for extra beams at the end of the guide rail.