Setting volume amplify, Setting the ring volume, Setting beeper volume – Brother Fax-885MC User Manual
Page 40
4 - 5
I N I T I A L S E T U P
WARNING
It is important that you do not choose PERMANENT unless all users are
hearing-impaired. Otherwise, the default setting of AMPLIFY may damage the
hearing of some users.
Setting Volume Amplify
Please carefully read Setting the Handset Volume before you do the following steps:
1
Press Menu/Set, 1, 4.
2
Press
to select
VOL AMPLIFY:OFF?
if
none of the users are hearing-impaired and go to
Step 4—OR—If some or all of the users are hearing-
impaired, select
VOL AMPLIFY:ON?
and then press Menu/Set.
3
Press
to select
PERMANENT?
if all the users
are hearing-impaired—OR—Select
TEMPORARY?
if only some of the users are
hearing-impaired.
4
Press Menu/Set.
5
Press Stop/Exit.
Setting the Ring Volume
You can adjust the ring volume when your fax machine is idle. You can select a ring
volume level or press until the ring is off.
Press
to adjust the volume level. With each key press, the fax machine rings so
you can hear the current setting and the LCD shows the setting you are choosing. Each
key press changes the volume to the next setting. The new setting will remain until you
change it again.
Setting Beeper Volume
You can set the beeper to
LOW
,
HIGH
or
OFF
. The default setting is
LOW
. When
the beeper is set to
LOW
or
HIGH
, the fax machine beeps every time you press a key
or make an error, and at the end of fax sending or receiving.
1
Press Menu/Set, 1, 3.
2
Press
to select your setting, and then press Menu/Set.
3
Press Stop/Exit.
4 . V O L U M E A M P L I F Y
V O L A M P L I F Y : O F F ?
or
P E R M A N E N T ?
or
or
3 . B E E P E R
or