Agio International Sling Chaise Lounge - Manual

MODEL # 50-4662-702
Page 2
HEX WRENCH
BOLT
PARTS LIST DESCRIPTION QTY./PCS PARTS LIST DESCRIPTION QTY./PCS
SLING SEAT FRAME
1
1
1 2
2
2
SLING BACK FRAME
IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!
E15 X 4MM
PLASTIC WASHER
E8.5 X 1.5MM
WASHER
A
B
Important Note: The basic assembly of the chaise lounge is to attach the
back frame to the lounge frame. We recommend two people work together
to line up the holes on the back frame with the fixed nut holes on the lounge
frame to ensure the bolts are on a straight, direct path. Starting the bolts at
an angle could cause cross threading which will ruin the entire lounge frame.
Step 1: Identify all parts packed in the carton against the parts list. Remove
all protective materials. Set the parts on a flat, non-abrasive surface. If you
are missing any parts or are unsure as how to proceed with the assembly,
please call our Customer Service Center at 1-800-416-3511. Do not attempt
assembly if any parts are missing or damaged.
Step 2: From behind the chaise lounge back frame, add a E8.5x 1.5mm washer
to bolt and insert a bolt through the hole in the lower sling back frame. Add a
E15x 4mm plastic washer before inserting into the fixed nut inside the sling seat
frame (see diagram). Hand tighten 3-4 revolutions only. Completely
tightening at this point could cause the frame or the sling seat to be uneven.
Repeat on opposite side.
Step 3: Using the hex wrench provided, tighten bolts. Tighten each bolt a
few revolutions at time, alternating back and forth between the two bolts
until they are completely tightened. It is important to alternate between bolts
to ensure your frame and sling seat are even. Do not over tighten. Over
tightening could damage the threads on the bolts or nuts.
Step 4: Examine the chaise lounge from the front. The back frame should
look square and be tight. If the back frame is appears warped or uneven,
loosen all the bolts and repeat steps 2 and 3.
Step 5: Your chaise lounge should be ready for use. If you do not feel that
your chaise lounge is sitting properly, double-check your assembly
procedure. If you have any questions, please call our customer service
center at 1-800- 416-3511.
A
B