3D Robotics RTF Aero - Manual (Page 21)

21
Missions
GPS
GPS lock required
Once you have saved a mission to the Aero, ensure that the
autopilot acquires GPS lock during the preflight steps, and
take off in manual, stabilize, or fly-by-wire mode. Fly to the
approximate altitude of the first waypoint, and switch into
autonomous mode to start the mission.
Use a ground station computer with the provided Telemetry
Radio to fly a fully autonomous mission. To download software
and learn how to plan a mission, visit 3dr.com/learn.
laptop ground station with 3DR Telemetry Radio
!
Do not set the Aero to autonomous mode without following
the mission planning instructions at 3dr.com/learn .
To fly a mission with automatic takeoff and landing, visit
3dr.com/learn for instructions.