Zero Gravity Honda CBR 250R (11-12) Windscreen - Manual (Page 6)

Honda CBR250R (11-13) DIY Windscreen Install
6
443-IS
SPORTBIKE SADDLES & WINDSCREENS
WWW.ZEROGRAVITY-RACING.COM
Once removed look at OVERVIEW 1 of 2 image and remove the screws. Then carefully pop these out, outlined in white cir-
cle and replace it with a Zero Gravity Windscreen. Follow the instructions carefully in reverse, there are a few steps
below to guide with the install.
Front Face Removal
Please see www.zerogravity-racing.com for
further information concerning this product.
Special Note: Sport Touring Windscreen
Brake lever position, factory setting should
not become a problem. Altered brake lever
position may cause contact with the wind-
screen at a full left turn.
Sport Touring Windscreen Disclaimer
LEFT IMAGE: Shows after the gauge is in place to
compress the gauge to the upper fairing to seat cor-
rectly.
RIGHT IMAGE: After the gauge is compressed, apply
pressure to the thumb and press to snap in the gauge
cluster.
FFR RO ON NTT B BIIK KE E
Gauge Install & Clip Snap