Zero Gravity Honda CBR 250R (11-12) Windscreen User Manual
Page 5
Honda CBR250R (11-13) DIY Windscreen Install
5
443-IS
SPORTBIKE SADDLES & WINDSCREENS
WWW.ZEROGRAVITY-RACING.COM
Remove four Small screws attached from the front face
fairing and side front fairing on either side of the bike.
Be careful not to drop the fairings or windscreen.
Side Front Fairing Removal
FFR
RO
ON
NTT B
BIIK
KE
E
Once removed it will look like this.
Front Face Removal
Pull the side and front fairing away from the headlamp
and be sure to route the headlamp side mount to the
side fairing through the access opening.
Side and Front Fairing Removal
Once all of the fairing screws are removed place the
headlamp dowel into the rubber grommet on either side
of the bike as shown. Caution:
The headlamp is
supported by those dowels only.
Side and Front Fairing Removal
FFR
RO
ON
NTT B
BIIK
KE
E
Headlamp Dowel
Access Opening
Headlamp
side Mount