Yamato Scientific IN603W Low Temperature Incubators - Manual (Page 23)

19
Operation Method
Auto Stop Operation
Start operation
AUTO START
FIXED TEMP
AUTO STOP
PROGRAM
STANDBY
END
HEATER FUNCTION PROGRAM MENU ENTER CANCEL
POWER
TROUBLE
℃
Set TEMP 37.0℃↑
Stop in 30min
REFRIGE
DEFROST
①
Press the ENTER key to decide the setting and
the auto stop operation starts. The blinking
AUTO STOP lamp lights on and the Sub Display
displays the setting temperature and residual time
to operation stop.
② The countdown of timer is suspended when the
temperature in furnace is out of the range of
"within ± 1℃ to the setting temperature". In
this case, the Sub Display displays "Wait" with
blinking. The time display on the right side of
"Wait" shows the total waiting time in operation.
Set TEMP 37.0℃↑
Wait 1min
(Waiting screen)
4
AUTO START
FIXED TEMP
AUTO STOP
PROGRAM
STANDBY
END
HEATER
REFRIGE
FUNCTION PROGRAM MENU ENTER CANCEL
DEFROST
POWER
TROUBLE
℃
Stop time
2002/01/01 12:30
③ The operation stops when the residual time
counts zero. The END lamp blinks and the Sub
Display displays the operation finish time when
the operation stops.
™ The wait function is not activated when the auto stop
operation is carried out with "Clock" mode. The
operation stops at specified time.
④ Press the POWER key to quit operation.