beautypg.com

Operation method, Auto stop operation – Yamato Scientific IJ300W Low Temperature Incubator User Manual

Page 24

background image

20

Operation Method

Auto Stop Operation

3. Stop/terminate timer operation

• The operation stops automatically at setting time.
• Buzzer continues to sound for about five minutes at operation

stop.

• The setting temperature screen displays the character "End",

which indicates termination of operation, with the FIXED TEMP
and AUTO STOP lamps lighting on. Press the START/STOP
key to terminate the timer operation mode. The screen returns
to the initial setting screen.

To correct or check setting…

Changing the setting temperature or time during operation is possible by pressing the TIMER key. Use
the "▼▲" to change the setting value. Press the ENTER key respectively after changing the setting.

Press the "▼" to display the setting temperature, operation mode and residual time on the setting
temperature screen.

This manual is related to the following products: