Yamato Scientific IJ100 Low Temperature Incubator - Manual (Page 13)

11
Operation Method
Sequence of Operation
Temperature Preset Function Using Method
•
Temperature. Preset is the function to memorize a specified temperature. It is useful to
register any temperature used frequently during operation.
•
The preset temperature can be registered any time if the power switch is ON in normal
operation. To register this, follow the procedure shown below.
•
Operation continues even when the temperature preset is being registered.
1. Press the Enter key
twice.
ENTER
•
The main indicator shows the temperature registered
currently.
•
Then, the dot point to the left of the main indicator blinks and
indicates that the operation is in the preset temperature
registration mode.
MEASURED TEMP
NOTE) If not registered, the main indicator blinks .
Temperature Setting Method
1. Press the ▼ key or ▲
key until the required
value is given in the
main indicator.
2. When the required value
is given, press the
Enter key.
ENTER
•
The previous temperature is deleted.
•
Blinking of the previously set temperature is changed to the
display for the current measurement.
Preset Temperature
Registration Mode