Yamato Scientific IJ100 Low Temperature Incubator - Manual (Page 12)

10
Operation Method
Sequence of Operation
Fixed Temperature Operation
1. Turn on the power.
•
The main indicator shows the current internal temperature.
MEASURED TEMP
•
Fixed temperature operation is started with the target of the
previously set temperature.
When the power is turned on, the controller resets automatically
to the condition immediately before the previous power-off.
Changing Temperature Setting
1. Press the Enter key.
ENTER
•
The main indicator blinks the currently set temperature.
MEASURED TEMP
2. Press the ▼ key or ▲
key until the required
value is given in the
blinking number
3. When the temperature
reaches to the required
value, press the Enter
key.
ENTER
•
The blinking indicator of the temperature setting is turned on,
and the fixed temperature operation is started toward the
newly set temperature.