Yamato Scientific DX602 Constant Temperature Drying Oven - Manual (Page 39)

37
14. Standard installation manual
* Install the product according to the following: (Confirm separately for optional items or special
specifications)
Model Serial number Date
Installation mgr.
(company name)
Installation mgr.
Judg
ment
№ Item Implementation method
TOC No. Reference page of the
operating instruction manual
Judg
ment
Specifications
1 Included items
Check for number of staffs against
the included item field
10. Specifications field P.33
・ Visual check of environmental
conditions
Caution: Take care for
environment
2 Installation
・ Securing a space
2. Before operating the
unit
・ On the installation site
P.4
Operation-related matters
1 Source voltage
・ Measure the user side voltage
(outlet) with a tester
・ Measure voltage during operation
(shall meet the standard)
Caution: Always use a plug that
meets the specification for
attaching to the ELB.
2. Before operating the
unit
・ Be sure to connect
the ground wire.
・ Power supply is ….
10.Specifications
・ Specification-power
supply
P.8
P.7
P.33
2 Operation start
・ Starts operation
Performs fixed value operation,
auto stop operation or auto start
operation
2. Before operating the
unit
・ Installation
procedures…
4. Operating procedures
P.4～
8
P.12～
25
Description
1
Operational
descriptions
Explain operations of each compo-
nent according to the operational
instructions
4. Operating procedures
・ Operating
procedures
1. Safety precautions ～
13.List of dangerous
materials
P.12～
25
P.1～
～ 36
2 Error codes
Explain the customer about error
codes and procedures for release
according to the operational
instructions 8. Troubleshooting
～
9. After sales service
and warranty
P.30
32
3
Maintenance
and inspection
Explain operations of each
component according to the
operational instructions
6. Maintenance
procedures
・ Daily inspection/
maintenance
P.28
9. After sales service and warranty
4
Completion of
installation
Entries
・ Fill in the installation date and the
installation mgr. on the nameplate
of the main unit
・ Fill in necessary information to the
warranty card and hand it over to
the customer
・ Explanation of the route for
after-sales service
P.32