Yamato Scientific DN410I Inert Oven - Manual (Page 63)

13
Operating Procedure
When prepared completely, proceed as follows:
1. Turning on of power supply 2. Selection of operation menu
•
Turn on the earth leakage breaker.
•
Press the MENU key several times to select
desired operating method.
•
The present time is shown on the sub display.
•
It allows you to enter each parameter into a
flashing menu.
• Push the POWER key in the operation panel.
• When once the power is on, this oven becomes
a standby state. Under such a condition, every
operation mode can be selected by pushing the
MENU key.
3. Explanation of operation menu
Fixed
Temperature
:
It is an operation method to bring the oven to the desired temperature and
keep it steady.
Auto stop :
It is an operation method to stop a fixed temperature operation when
reached the set time or hours.
Auto start :
It is an operation method to start the fixed temperature operation when
reached the set time or hours.
Program :
It is an operation method that can start or stop an operation either when
reached the set time or hours. Moreover, it can change the temperature
when reached the desired time and repeat to do that.