Yamato Scientific DN410I Inert Oven - Manual (Page 41)

35
List of Symbols in the display
The oven has the controller with the 4-digit LED display. The meaning of symbols in the display is as follows:
Capital Symbol Meaning of Abbreviation Meaning of Symbol in the display
A accumulation Integrated time
B beep Alarm sound setting mode
C Calibration Calibration offset setting mode
D delete program Deleting a program
display Sub display switching mode
E end Setting mode for program end
error # Error code #
F f. wt (Forced wait)
Forced wait state after the power restoration
H hold Hold function mode
hr. mn (hour. minute) Setting of time (hour, minute)
L lock Panel locking mode
Ｍ
mn. dy (month. day) Setting of the date (month and day)
O off Make a function inactive
on Make a function active
P program # Program number
program Program mode
program, segment Ongoing program and ongoing segment
R repeat count Repeat frequency setting mode
real (real time) The hour
repeat Repeat command mode
rest time # Rest for remaining time
ramp level Ramp level of Segment # (Desired set temperature)
repeat start Repeat start segment setting mode
ramp time # Ramp time of Segment #
(Time required to reach the ramp level)
r. tim (real time) the hour
S segment # Segment number
soak time Soak time of Segment # (Holding time of the ramp
level)
step Not in Ramp Operation
T temp Temperature mode
time Time mode
W wait Wait function (Keep the operation until the desired
temperature is achieved)
wait # Wait function of Segment #
Y year the Christian era
#
#
#
#
#
#
#