Yamato Scientific BU300 Low Constant Temperature Water Bath - Manual (Page 6)

4
When using
Warning
1. Do not sprinkle water on the main body
„ When water splashes to the electrical
component, the leak and the electric shock are
caused. Water must not splash to the operation
panel and the power supply switch. Please turn
off the power supply on the building side when
water lies by any chance. And, please wipe
water off. The danger of the leak and the
electric shock grows when leaving as it is.
Caution
1. Do not operate without immersion temperature control device
„ Sure to combine with a immersion temperature
control device. The temperature of the liquid
goes down and it is impossible to keep a
constant temperature when using without
immersion temperature control device.
2. Turn the power of the refrigerator off
„ Please turn the switch of the refrigerator off
when a set point of immersion temperature
control device exceeds room temperature
+5
°
C.