Yamato Scientific BU300 Low Constant Temperature Water Bath - Manual (Page 10)

8
Preparation and confirmation before using
1. Pour the liquid into the reservoir
„ The amount of the overflow liquid changes
depending on the shape and the number of the
container. Please pour appropriate amount of
liquid into the reservoir. It is recommended to
pour the liquid to the extent that the liquid just
hides the cooling coil.
2. Attach immersion temperature control device
„ Please loosen the knob for fixation of the
immersion temperature control device and set it
up at the back of the main body. BU200
provides the immersion temperature control
device with the power from its service outlet.
Service outlet can be used as long as the power
supply switch of main body is turned on. For
more detailed information, please see the
instruction manual for immersion temperature
control device.