Yamato Scientific BU300 Low Constant Temperature Water Bath - Manual (Page 13)

11
Method of maintenance
Caution
When maintaining, please pull out the power supply plug from the outlet for safety. Do not
decompose the equipment.
1. Main body
„ Please wipe the dirt of the surface off with a soft cloth which squeezes and removed moisture. There is
danger of the electric shock. Please do not wipe the equipment with benzine, thinner or kurenzah etc.
Please do not rub with the scourer. The painting of the equipment is hurt and rust is caused.
2. Reservoir
„ When the reservoir becomes dirty with the scales and the floatage, please remove the cap of the drain
and pull out the liquid in the reservoir. After that, please wash the reservoir with the neutral detergent.
Afterwards, please rinse the detergent by water. Please do not use an alkaline detergent.
„ If reservoir is not used for a long term, empties the reservoir and keep it dry.