WORX WU434.1 1500W 190mm Circular Saw 240V - Manual (Page 8)

8
Technical data
type WU434 WU434.1 (421~459 -designation of machinery,
representative of ciRcUlaR SaW)
Voltage 220-240V~50/60Hz
Power input 1500W
No load speed 5000/min
Max. cutting capacity 90° 65mm
45° 48mm
Bevel capacity 0-56°
Blade size 190mm
Protection class /II
Machine weight 4.3kg
Noise information
A weighted sound pressure L
pA
:94.4dB(A)
A weighted sound power L
wA
:105.4dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
Vibration information
Vibration total values (triax vector sum) determined according to
EN 60745:
Typical weighted vibration
Vibration emission value
a
h
= 4.15m/s²
Uncertainty K = 1.5m/s²
Warning: The vibration emission value during actual use of the
power tool can differ from the declared value depending on the
ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials is cut or drilled.
The tool being in good condition and well maintained
To use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
this tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning: To be accurate, an estimation of exposure level in the
actual conditions of use should also take account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
•
•
•
•
•
• •
•
•
•
•
•
•
•