WORX WU434.1 1500W 190mm Circular Saw 240V - Manual (Page 14)

14
Plug replacement
(UK & Ireland only)
If you need to replace the fitted plug then follow the instructions
below.
iMPoRtaNt
The wires in the mains lead are colored in accordance with the
following code:
BlUe =NeUtRal
BRoWN = live
As the colors of the wires in the mains lead of this appliance may
not correspond with the colored markings identifying the terminals
in your plug, proceed as follows. The wire which is colored blue
must be connected to the terminal which is marked with N. The
wire which is colored brown must be connected to the terminal
which is marked with L.
Note: If a moulded plug is fitted and has to be removed take
great care in disposing of the plug and severed cable, it must be
destroyed to prevent engaging into a socket.
Warning!
Never connect live
or neutral wires to
the earth terminal
of the plug. only
fit an approved
13aBS1363/a plug
and the correct rated
fuse.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362