Wood’s Powr-Grip MRTA611LDC2 - Manual (Page 10)

Rev 0.0/4-14 8 MRTA6-DC2: #35072
Then attach the hoisting equipment hook to the lift spool as shown.
Make sure hoisting equipment hook is fitted with restraining latch to prevent
lift spool from slipping off under any circumstances.
Note: Make sure the hook does not interfere with the load, using a sling or other rigging as
necessary.
Only use slings rated to carry Maximum Load Capacity plus Lifter
Weight.
Use the hoisting equipment to raise the lifter out of the shipping
container. Be careful to avoid damaging any vacuum pads. Remove
the pad covers as shown, and save them for use whenever the lifter is
stored.
3) Configure the pad frame to provide optimal support of the load while lifting (see T
O
C
HANGE
THE
P
AD
F
RAME
C
ONFIGURATION
to follow).
4) Make sure the vacuum pads are clean (see MAINTENANCE: V
ACUUM
P
AD
M
AINTENANCE
: Pad
Cleaning).