Wood’s Powr-Grip MRT49DC2 - Manual (Page 28)

Rev 0.5/4-14 26 MRT4-DC2: #35071
A
FTER
U
SING THE
L
IFTER
Place the power switch in the OFF ( ) position, as shown
(power indicator light turns off).
Caution: Do not set lifter against any surfaces which
could soil or damage vacuum pads.
Use the hoisting equipment to gently lower the lifter onto a stable support; then detach the
hoisting equipment hook from the lift bail.
If the lifter is transported to another location, use the original shipping container and secure the
lifter so as to protect the vacuum pads and all other components from damage.
Storing the Lifter
1) Use the covers supplied to keep the vacuum pads clean, as shown.
!!–CE–!! The lifter is designed to rest on relatively horizontal surfaces without tipping over. To
store the lifter in this way, set the lifter with the pads facing downward on a clean, smooth, flat
surface. Then lower the lift bar to a horizontal orientation and place a support under the lift bail.
2) Charge the battery completely when placing it in storage and at six-month intervals thereafter
(see MAINTENANCE: B
ATTERY
R
ECHARGE
).
3) Disconnect the electrical connectors, as shown, in
order to minimize battery drainage.
4) Store the battery at temperatures between 32° and
70° Fahrenheit [between 0° and 21° Celsius].
Note: Storage at temperatures above 100° Fahrenheit
[38° Celsius] should be avoided.