Wood’s Powr-Grip MRT49DC2 - Manual (Page 17)

Rev 0.5/4-14 15 MRT4-DC2: #35071
OPERATION
B
EFORE
U
SING THE
L
IFTER
The operator must determine whether the lifter is capable of performing each intended task (see
SPECIFICATIONS and INTENDED USE). In addition, all of the following preparations must be
completed prior to lifting any load.
Taking Safety Precautions
Read all directions and safety rules before using lifter.
• Be trained in all relevant industry and regulatory standards required to operate the lifter in your
location.
Always wear appropriate personal protective equipment.
• Take any personal precautions required to handle the load safely.
• Consult appropriate trade association guidelines to determine what precautions are necessary
for each type of load material.
Performing Inspections and Tests
Always check battery energy (as shown)
before using lifter. (See
MAINTENANCE: B
ATTERY
T
EST
)
• Perform all inspections and tests required by the
I
NSPECTION
and T
ESTING
S
CHEDULES
(see
MAINTENANCE).
• Always conduct a V
ACUUM
T
EST
before placing a lifter
in service (see MAINTENANCE).
• Caution: Examine each air filter regularly, and empty when necessary.
Two air filters help protect the vacuum generating system from contaminants (see
MAINTENANCE FEATURES) but would not necessarily prevent liquid from entering the vacuum
system. Examine each filter regularly, to determine whether service is needed (see IN-LINE AIR
FILTER SERVICE in
SERVICE MANUAL for details).