Western Digital My Book Essential User Manual - Manual (Page 37)

MY BOOK ESSENTIAL
USER MANUAL
MANAGING AND CUSTOMIZING YOUR DRIVE – 32
Managing and Customizing Your Drive
This chapter includes the following topics:
Using the WD SmartWare Icon
Opening the WD SmartWare Software
Checking Drive Status
Monitoring Icon Alerts
Safely Disconnecting the Drive
Customizing Your Software Settings
Customizing Your Drive Settings
Uninstalling the WD SmartWare Software
Restoring the WD SmartWare Software and Disk Image
Using the WD SmartWare Icon
After you have installed the WD SmartWare software, the WD SmartWare icon displays in
the Windows taskbar:
By clicking the icon, you can:
• Open the WD SmartWare software
• Check the drive status
• Monitor icon alerts
• Safely disconnect the drive
The following sections describe how to use the icon and other ways to do these things.
Opening the WD SmartWare Software
If the WD SmartWare software does not start automatically, you can start it by:
• Clicking Start > (All) Programs > WD SmartWare > WDSmartWare
• Double-clicking the WD SmartWare icon in the taskbar
Note: You can also left- or right-click the WD SmartWare icon in the taskbar and
select WD SmartWare.
Checking Drive Status
Hover the pointer over the WD SmartWare icon in the taskbar to see the drive capacity
used and drive temperature status, and to find out if the drive is locked:
1
6