Wasp Barcode WLS8600 Product Reference Guide - Manual (Page 13)

CONFIGURATION
3.2 SETUP PROCEDURES
For WLS8600 Series readers, follow the setup procedures in pars. 3.3, and 3.4.
Proceed as shown in the following diagram:
BEGIN SETUP
Follow the procedure indicated
below.
1. Restore default parameters
Scan the Restore Default barcode at section 3.3,
WLS8600 Setup.
2. Scan the interface code
Go to section 3.4, Interface Selection and choose
the appropriate barcode for your application.
END SETUP
Your reader is now ready to read
barcodes using the default settings.
7