Waldmann PULSE HFMD version VFC III - with MFT - Manual (Page 7)

7
GB Operating Manual Light control “PULSE HFMD - Vers. III“ GB Operating Manual Light control “PULSE HFMD - Vers. III“
Operation Main functions
Switching on
Press the key I - this will switch on
light level I.
Press the key II - this will switch on
light level II.
Switching off
Briefly press the key on which
the LED is lit - this will switch off
the light.
Change level
Briefl y press the key on which the
LED is not lit - this will switch the
light to the other light level.
Adjusting the light level
Press the key (level I) or the switch
(level II) and keep it pressed. The
appertaining LED [I or II] and the
logo start flashing after approx.
2 seconds. The light changes its
intensity.
To change the dimming direction,
briefl y (< 1 sec) release the key and
press it again.
Upon reaching the upper or lower
limit, the LED and the logo fl ash
more slowly and the intensity
changes direction.
The presently reached dimming
level is stored when you release
the key.
Fig. 3
Key I
Light
bar
Key II
LED I
LED II