Waldmann PULSE HFMD version VFC III - with MFT - Manual (Page 17)

17
GB Operating Manual Light control “PULSE HFMD - Vers. III“ GB Operating Manual Light control “PULSE HFMD - Vers. III“
Explanation of the functions (part 2)
Function 4
Write protection
Function to admit or prevent setting
variations.
The default setting of the function
is “OFF“, i.e., the set levels can be
overwritten at any time.
The levels cannot be changed if the
write protection is active.
The function can be changed on
lights with sensors XXX /P
Function 5
Light control
Function for the automatic readjus-
tment of the set brightness in case
the ambient brightness changes.
The default setting of this function
is “ON”, i.e., the light control is
active.
If the light control is switched off,
the light functions as a dimmable
light.
The function can be changed on
lights with sensors XXX /P
Function 6
Presence control
Function to detect the presence
of persons.
The default setting of this function
is “ON”, i.e., the presence control
is active.
If the function is switched on, the
light automatically switches off, if
for a certain time no presence is
detected.
If the presence control is switched
off, the light functions as a light
with light control or as a dimmable
light.
The function can be changed on
lights with sensors XXX /P
Fig. 3
Key I
Light
bar
Key II
LED I
LED II