Waldmann PULSE HFMD version VFC III - with MFT - Manual (Page 16)

16
GB Operating Manual Light control “PULSE HFMD - Vers. III“ GB Operating Manual Light control “PULSE HFMD - Vers. III“
Explanation of the functions (part 1)
Function 2
External switching
Function to operate the light via
external switching elements.
The default setting of the function
is “OFF“. When power is supplied
from an external place, the light
remains switched off.
If the function is active, the light
switches to the level which was set
last as soon as the power supply
is switched on (e.g. via a switched
power outlet).
The function can be changed on
switch lights XXX /2
dimable lights XXX /D
lights with sensors XXX /P
Function 1
Background light
Function to switch the logo back-
ground light on and off.
The default setting of the function
is “ON“. The background lighting of
the logo is always active as soon
as the light is connected to the
power supply.
When changing the function,
the logo lights only with the light
switched on.
The function can be changed on
switch lights XXX /2
dimable lights XXX /D
lights with sensors XXX /P
Function 3
Synchronous control
Function to switch over from
synchronous to asynchronous
operation.
The default setting of the function
is “ ON“, i.e., both sides of the light
are operated simultaneously.
If the function is “ OFF“, key I con-
trols the lamps on one side and
key II the lamps on the other side
of the light (e.g. on double lights or
for twin workplaces).
The function cannot be changed!
Fig. 3
Key I
Logo
Light
bar
Key II
LED I
LED II
Note: The functions written in red
are not active.