Explanation of the functions (part 4) function 11, Function 10 – Waldmann PULSE HFMD version VFC III - with MFT User Manual

Page 19

Operating Manual Light control “PULSE HFMD - Vers. III“

Explanation of the functions (part 4)

Function 11

Demo mode

Function to demonstrate and to

test the light functions.

The default setting of this function

is “OFF“, i.e., the demo mode is

inactive.

All control times are working in the

seconds range if the demo mode

is switched on.

Note: This mode is left automati-

cally 10 minutes after the last key

was pressed.

The function can be changed on

lights with sensors XXX /P

Function 10

Sensor LED

Function to switch both LEDs in the

sensor operating panel on and off.

The default setting of the function

is “OFF”, i.e., the LEDs in the light

head are switched off.

For lights without the column

operating panel, the function is

switched to “ON“.

If the function is switched on, the

LEDs in the light head light in addi-

tion to the light bar display.

The function can be changed on

lights with sensors XXX /P

Fig. 3

Key I

Logo

Light

bar
Key II

LED I

LED II

Fig. 8

Sensor LEDs