Vigo VG06062 - Manual (Page 9)

9
MODEL VG06062
FIG.5
THIN
GASKETS
VIEW FROM INSIDE
DOOR
SIDE GLASS
PANEL (4)
SCREW THIS HALF
OF THE HINGE TO
THE DOOR
SCREW THIS HALF
OF THE HINGE TO
THE SIDE GLASS
PANEL
8
THIS SIDE OF THE
HINGE IS LOOKING
FROM THE INSIDE
OF THE CABIN
HINGE (8)
C. HINGE INSTALLATION
1. Clean the glass surface on the side glass panel (#4) where the hinges (#8) are to be installed
with rubbing alcohol.
2. Position hinges on the side glass panel. [SEE FIG.5] Place shim(s) as needed between the
glass and the hinge on the bottom. The metal should not rest on the glass. [SEE FIG.5A]
3. Place gaskets on each side of the side glass panel. Screw the hinges to the side glass panel
with the hex key (supplied).
INSIDE VIEW
SIDE GLASS
PANEL (4)
HINGE (8)
CLEAR
PVC SHIM
FIG.5A
SCREW THIS HALF
OF THE HINGE TO
THE DOOR
SCREW THIS HALF
OF THE HINGE TO
THE SIDE GLASS
PANEL
8
THIS SIDE OF THE
HINGE IS LOOKING
FROM THE
OUTSIDE OF THE
CABIN
SEAL
STRIP (14)
CLEAR
PVC SHIM
HINGE (8)
INSIDE VIEW
SIDE GLASS
PANEL (4)