Vigo VG06042A - Manual (Page 8)

8
MODEL VG06042
DOOR PANEL
OUTSIDE HANDLE
INSIDE HANDLE
SCREW
METAL WASHER
CLEAR WASHER
WHITE TUBE
GLASS SUPPORT
METAL WASHER
D. INSTALLING THE STRUCTURAL ARM
1. Attach the structural arm (#30) to the top turning hinge base (#1).Note that the structural arm has
an adjustable screw hole of 1/2" length. This will allow for flexibility and proper install placement
[SEE FIG. 5 & 5A].
2. Mark two holes on determined locations on the wall for the mounting screws and insert plastic
anchors (#16) into them.
3. Resecure the structural arm to the turning hinge base and tighten the screw (supplied)
connecting the turning hinge base and the structural arm.
4. Screw the structural arm making sure it is firm and plum to the wall with 1 5/8 " phillips screws
(#14) and push screw covers into place.
E. INSTALLING THE HANDLE
1. Unscrew the handle holders from the handle assembly (#8).
2. Place the handle to to position on the door. Place plastic washers (supplied) on each side of the
door. [SEE FIG. 6]
3. Tighten the handle nuts from inside the shower.
WALL
14
30
16
FIG.5
FIG.6
FIG.5A
1/2" tolerance adjustment
THREADED SCREW
See Fig. 5A