Vigo VG0601 - Manual (Page 8)

15
13
FIG.7
SEAL STRIP INSTALLATION
8
10
4
10
15
13
1/4"
4
10
14
15
13
MODEL VG06011
E. INSTALLING THE WATER SEAL STRIP
1. Clean all glass panel edges receiving seal strips with rubbing alcohol. [SEE FIG.7]
2. Cut seal strips (#10, #15) according to seal strip diagram (FIG.7).
3. Verify that the seal strip lips are facing toward the inside of the cabin.
4. Install seal strips according to seal strip diagram (FIG.7).
5. Depending on the installation it may be necessary to notch the flange part of the door side seal
strip (#14) in order to have the door close in a smooth manner with out crushing the flange. This
application will only occur when the door is in closest/tightest position to the front glass panel.
When the door is pulled away from the front fixed panel the seal may not need to be knotched.
5
14