Vigo VG0601 - Manual (Page 10)

FIG.9
3
1
2
16
10
FIG.10
MODEL VG06011
H. APPLYING THE SILICONE
1. Apply clear silicone caulking to the inside between the wall and side seal strip. Repeat for the
other side. [SEE FIG.10]
2. Apply clear silicone caulking to the inside between the side panel bottom and the bottom rail.
3. Apply clear silicone caulking around the inside perimeter of the bottom rail.
4. Apply silicone where the corner joints meet the base rails.
IMPORTANT !
WAIT 24 HOURS BEFORE USING SHOWER
DO NOT ALLOW WATER TO DIRECTLY HIT DOOR SEAL STRIPS
I. INSTALLING HEX SCREW COVERS
1. Install hex screw covers (#21) to the hex screws that mount the hinges, wall connectors, and
glass supports.