Vicor PRM-AL Customer Evaluation Boards - Manual (Page 5)

UG:003 vicorpower.com Applications Engineering: 800 927.9474 Page 5
2.0 Hook Up
2.1 Connect the power supply +Out lead to the +In terminal of the Customer
Evaluation Board.
2.2 Connect the power supply –Out lead to the –In terminal of the Customer
Evaluation Board.
2.3 A high quality, low-noise power supply should be connected to these locations
2.4 Connect a lead between the +Out of the Customer Evaluation Board and +In
of the load.
2.5 Connect a lead between the –Out of the Customer Evaluation Board and –In
of the load.
2.6 Connections to these locations should be with short heavy gauge leads.
3.0 Verify Connections
Figure 3.
PRM Customer Board Layout
switch bank
(item 5)
switch reference
(silk screen)