Vicor FlatPAC Family 50 to 600 Watt AC-DC Switchers A-Series - Manual (Page 7)

If the unit is operated unmounted, insert a #6 or metric screw through each hole
from below and secure with a nut on top, torqued to 6 in-lbs (0.7 N-m).
Output Terminal Connections. A hardware kit with parts for output terminal
connections is provided with each FlatPAC unit. The following drawing shows the
assembly of those parts for the proper connection of metal power terminals.
Assembly for PCB power terminals is the same except that they do not require an
external tooth lockwasher. Consult the table below for the recommended torque
level for each stud size.
For More Information
The Vicor Applications Manual and product data sheet contain complete
information about FlatPAC AC-DC Switchers. To receive literature or to consult
an applications engineer about installation or operation of this product, contact
your nearest Vicor office. (See page 8.)
(Bitte lesen Sie die Sicherheits-Vorschriften auf Seite 8.)
“AMP” and “Faston” are registered trademarks of AMP, Incorporated, Harrisburg, PA.
7
Metal Terminal
Drawing: P.N. 10894 #1
Terminal and Terminal Recommended
Product Model Style Stud Size Torque
–Output, +Output
LF-, PA/PF-, & PCB 8-32 UNC 10 in-lbs (1.1 N-m)
RA/RF-Series
MA/MF- & Metal 10-32 UNC 15 in-lbs (1.7 N-m)
NA/NF-Series
QA/QF-Series PCB 8-32 UNC 10 in-lbs (1.1 N-m)
Metal 10-32 UNC 15 in-lbs (1.7 N-m)
Supervisory Sized to accept AMP Faston ® insulated
All models receptacle #2-520184-2
EXTERNAL TOOTH
LOCKWASHER
#10 TERMINAL
RETAINING NUT
#10 NUT PLATE
USER OUTPUT
TERMINALS
#10 BRASS STUD
HELICAL
LOCKWASHER
(FITS WITHIN
OPENING PROVIDED)
TERMINAL COVER
NEGATIVE