Introduction, Safety information, Specifications – UVP SI-950 Ultraviolet Incubator User Manual
Page 2

UV Incubator
Page 1
Introduction
This single chamber unit is designed for the variable-temperature incubation and humidification
envelopment of microbiology organisms, biology assays and any protocol requiring heat incubation
in the range of ambient +10°C to 68°C.
The Incubator is constructed with built-in overhead shortwave 254nm UV tubes for decontamination
of the chamber between experiments.
Safety Information
The UV Incubator is designed with function, reliability and safety in mind. It is the user’s
responsibility to install the unit in conformance with local electrical codes.
Specifications
Temperature
Range
Ambient to 68
O
C
Sensor
LM345 Integrated Temperature Sensor
Controller
PI
Setpoint
Digital
Display
Digital LED
Accuracy
+0.5
O
C
Uniformity
+0.1
O
C at 37
O
C
Relative Humidity
~ 80%
Unit Heat Load
Typical operation
Incubation
Heating Element
1250 Watts, 4,265,1777 BTUXH
Dimensions
Exterior W x H x D
17.5 x 17 x 14” (445 x 432 x 356mm)
Interior W x H x D
14 x 10.7 x 10.9” (356 x 272 x 277mm)
Shelves (2 standard)
Dimensions (W x D)
13.3 x 8.5” (338 x 216mm)
Construction
Formed stainless steel
Surface area
113.05 in
2
Construction
Interior volume cu ft
0.95 cubic feet (26.9 liters)
Interior
Stainless steel
Exterior
Aluminum powder coated
Door
Polycarbonate
Electrical
115V
60 Hz
230V
50 Hz
100V
50/60 Hz