beautypg.com

Pump install – Unisteer 8010730-01 MOPAR B Body Kit User Manual

Page 6

background image

pg. 6

655530

Pump Install

1) The pump assembly comes with brackets made to mount to the big and small block Mopar
motor, depending on the kit you ordered. Install the pump assembly to the motor as seen in the
illustrations. Use the 5.5” Bolt #231220 for the upper bolt hole, with the spacer installed this bolt
is long enough that it threads into the rear bracke

t. Use the 4.5” Bolt #231210 for the lower

mounting hole. Tighten the mounting hardware to 35 ft/lbs.

This manual is related to the following products: