TruXedo TonneauMate User Manual
Page 4
Slide two square head bolts with washers and nuts to the center
of the mounting rail.
3
Lift and hook one side of toolbox to mounting rail.
4
tOOlbOX anD fasteners installatiOn
Lift and hook other side of toolbox to mounting rail.
5
Open lid to assure proper clearance.
6
Once the toolbox has been positioned, slide the fasteners over the hanger brackets and tighten securely. Tighten the
four lock nuts on the inside of the toolbox to keep from sliding from side to side.
7
Hanger
bracket
insiDe
lOck nUts
Hanger
bracket