Telematrix SP200 User Manual

Page 19

Text mode
Original mode

Using a Pause when Dialing a Phone Number

To use a Pause when dialing, press the

“PAUSE” key at the appropriate point in the

number sequence being dialed from the key pad.

NOTE: Each “Pause” counts as 1-digit when stored into a speed dial memory location..

NOTE: The default Pause timing is 3.6-seconds.

A multiple of Pauses can be programmed

into speed dial memory to increase the delay.

Note: Programming can

only be performed when

the phone is off-hook

Programming Pause into Voice Mail

To store a Pause time into Voice Mail memory, simply press the Pause key in the number-
ing seq uence w hen p rogramming t he V oice M ail S peed D ial Key. S ee programming V oice
Mail on the next page.